Custom Sportswear Tech Packs: Samples, Sizing and Approval
Build a clear sportswear tech pack, check size sets and record sample approvals before placing a bulk teamwear order.
A jersey can look right in a photograph and still fail the order: the sleeve restricts movement, the youth fit follows an adult pattern, or the sponsor logo moves when the design is graded. For a bulk teamwear buyer, the useful question is whether the factory and the buyer have agreed on the same finished garment.
A tech pack turns that agreement into a controlled document. Combined with a measured sample, a size set and written approval conditions, it gives your purchasing team something concrete to compare with quotations and production. This guide explains what to prepare for a custom sportswear or team uniform order before you authorize bulk cutting.
Start with the program, then define each style
Describe how the kit will be used. A loose training top, a fitted match jersey and a retail replica can share artwork while needing different patterns, fabrics and acceptance criteria. Record the sport, player group, intended fit, destination market and whether the range includes adult, youth or separate fit blocks.
Give every garment a style code and revision number. List the order quantities by style, colour and size, with a separate roster for names and numbers. State whether shorts, shirts and outerwear must match as a set. Ask suppliers to identify exclusions and assumptions in their quotations; an attractive unit price is difficult to compare if one quote excludes labels, grading or individual packing.
Build a tech pack that can be checked
Use the Apparel & Uniform Tech Pack Template in Buyer Resources as a starting point. Complete these sections for each style rather than sending a logo and asking for a standard jersey:
- Drawings: front, back and detail views showing panels, collar, cuffs, vents, pockets and seam positions.
- Materials: fibre composition, knit or woven construction, target fabric mass, stretch direction, lining, mesh panels and trim references. Name any finish separately from the base fabric.
- Measurements: a finished-garment measurement chart, size range, measurement diagrams and agreed tolerances for each point.
- Construction: seam and hem requirements, reinforcement locations, elastic or drawcord details and workmanship expectations.
- Decoration: artwork files, version numbers, placement dimensions, colours, name and number rules, and the decoration method for each element.
- Delivery presentation: labels, hangtags, folding, unit packing, carton assortment and carton identification.
Replace subjective requests such as “premium fabric” or “US sizing” with measurable requirements. If you send a reference garment, identify what must be matched and what must change. Keep an agreed reference with both parties; an unrecorded verbal instruction is difficult to inspect later.
Separate body sizes from garment measurements
A body size chart describes the intended wearer. A finished-garment chart describes the product being purchased. They are connected by the intended ease and fit, but they are not interchangeable. A chest measurement taken around a person cannot be compared directly with a jersey measured flat across the front.
Define each point of measurement with a sketch: for example, the location of the chest width below the armhole, how body length is measured, and whether an elastic waistband is relaxed or extended. Specify units and measurement conditions. Agree whether the chart applies before or after the washing procedure used for approval.
Review grading across the whole range. Approving one medium does not establish sleeve width, neckline shape or body length at the smallest and largest sizes. For youth and adult ranges, ask which patterns are separate and where the size transition occurs. Test the proposed fit with representative wearers performing relevant movements, and record their feedback against the style and sample revision.
Use sample approvals as distinct decision points
Agree which samples are included, their cost and their purpose before ordering them. The names suppliers use can vary; the decision each sample supports should be explicit.
- Review materials and artwork. Check physical fabric and trim references, colour submissions and decoration proofs. A screen preview can confirm spelling and layout; it cannot establish the final feel or physical colour match.
- Review the development sample. Measure construction and assess fit. If substitute materials were used, list them and state which decisions remain open.
- Check the size set. Compare the agreed sample sizes against the measurement chart and assess grading. Select coverage appropriate to the range and risk rather than assuming one sample represents every size.
- Approve the pre-production reference. Confirm actual materials, decoration, labels and packing. Attach the final specification revision and list any remaining conditions that must be closed before production.
Use a short approval record containing the sample identifier, date, specification revision, measured results, photographs, comments and approver. Distinguish “approved for fit” from approval of colour, fabric or bulk production. After a correction, request evidence for that correction; do not assume an amended PDF means the physical sample has changed.
Control colour, graphics and player data
Agree how colour will be judged, including the physical reference, viewing conditions and any permitted variation. Confirm whether the same colour is achievable on different fabrics and trims before approving a coordinated kit. Ask for a decorated sample where print crosses a seam or panel so alignment can be assessed on the sewn garment.
Keep one controlled roster with unique order lines. Define the spelling, case, font, number format, placement and relationship between player and garment size. Have a second person check the final proof against that roster. Freeze the approved file at an agreed point and record later changes separately, including their effect on price and dispatch. Ambiguous spreadsheets and screenshots create avoidable reconciliation work.
Write acceptance criteria before testing
Turn intended use into a test brief. Relevant checks may include dimensional change after washing, colour transfer, print adhesion, seam performance, opacity and pilling. Their relevance depends on the garment. Agree the method, conditioning, number of wash cycles, pass criteria and who reviews the results; avoid accepting a report for an unrelated fabric as evidence for the finished decorated kit.
An illustrative RFQ entry might read: “Style TW-01, revision B; finished chest width measured at point C on the attached diagram; target and tolerance from the size chart; wash assessment using the agreed procedure; report results by size.” This illustrates the level of detail, not a universal measurement or test requirement.
For US-bound apparel, include a label review in the approval process. The FTC explains that most covered textile products need fibre content, origin and responsible-business identification; its textile labeling guide sets out scope and exceptions. The separate Care Labeling Rule guidance explains care instructions and the need for supporting evidence. Confirm the requirements for your particular product and market before approving label artwork.
Carry the approved specification into bulk inspection
Give the inspector the final tech pack, retained reference sample, approved roster and defect criteria. Identify what needs a full count or verification and what will be sampled. A sampling plan does not automatically mean every personalised name, number or size has been checked. Define that coverage expressly and review the report before making the release decision. The Lab & QC page and sample report in Buyer Resources can help frame the inspection brief.
For reorders, retain the final pattern and artwork references, material identifiers and approval history. Ask how substitutions, discontinued trims and new colour batches will be submitted for review. Send your style list, size breakdown and current tech pack through SialSourcing’s quote form, and identify any specification or sampling decisions you still need help resolving.
Ready to Start Sourcing?
Our team is ready to help you find the right manufacturer in Sialkot.
Get a Free Quote